Rail Fastening System Guide for Railway Track Projects
Rail fastening holds the rail to the sleeper, slab or pad and keeps gauge, alignment and electrical isolation. This guide explains the components, the system types used on different track structures, and the information a project needs before a quotation.

Rail Fastening System Guide for Railway Track Projects
A rail fastening system is the assembly that clamps the rail to the sleeper, slab or pad and keeps gauge, alignment and electrical isolation under traffic and temperature change. Components may include rail clips, rail pads, insulators, shoulders or dowels, nuts and washers, and they are chosen together rather than part by part. Selection depends on the rail profile, the sleeper or slab type, the track standard, the traffic carried and the environment, including coastal salt, tunnel moisture or desert heat. The same rail section can need a different assembly on timber, concrete or slab track.
To specify, list the rail profile and section, the sleeper or slab type, the track standard and the quantity, and describe the running environment. A checklist keeps the quotation comparable between suppliers. Railway track components explains how fasteners sit alongside fishplates, spikes, base plates and anchors in the same track structure.
Yuerui is a Shanghai-based trading company registered on Made-in-China and supplies rail fasteners and track components through qualified supply chain partners. It can quote to the Chinese, European, Russian GOST, Ukrainian DSTU or American AREMA standard that a project specifies. Typical lead time is about one month in both peak and off season, depending on product and order quantity. Payment is accepted by L/C, T/T, D/P, PayPal or Western Union in USD or CNY, on EXW, FOB, CIF or DAP terms, with shipment from Shanghai Port or Ningbo Port.
Yuerui lists North America, South America, Eastern and Western Europe, Southeast and Eastern Asia, Africa, Oceania and the Middle East as its main markets. Orders follow a confirmed pre-production sample and a 100% final inspection before shipment. Yuerui can provide MTC/COC documents, dimensional inspection reports, mechanical test reports and coating thickness reports, and can support third-party testing for tender requirements. ODM service and mixed loading of different track accessories in a shipment are available. Send the rail profile, sleeper or slab type, track standard and quantity to request a quotation.
Rail fastening system specifications
| Parameter | Value |
|---|---|
| Item | Railway Fastener SyStem |
| Material | 60Si2Mn/60Si2Cr |
| Usage | For train railway subway |
| Pack | Standard Package |
| Customized | Customized |
| Surface | Black Oxide, Plain Oiled, Color Painting, HDG |
| Feature | High Tension, Galvanized |
| Transport Package | Wood or Iron Pallet |
| Parameter | Value |
|---|---|
| Item | Railway Fastener SyStem |
| Material | 60Si2Mn/60Si2Cr |
| Usage | For train railway subway |
| Pack | Standard Package |
| Customized | Customized |
| Surface | Black Oxide, Plain Oiled, Color Painting, HDG |
| Feature | High Tension, Galvanized |
| Transport Package | Wood or Iron Pallet |
| Name | Specifications & Models | QTY | Material | Volume or mass |
|---|---|---|---|---|
| T-bolt | M22*100 | 2 | Q235A | 0.294 |
| Nut | M22 | 2 | Q235A | 0.15 |
| Nut cover | - | 2 | Nylon 6 | 4.7cm³ |
| Flat washer | φ23 | 2 | Q235A | 0.073 |
| Rail Clip | A Type | 2 | 60Si2Mn | 0.478 |
| Rail Clip | B Type | 60Si2Mn | 0.445 | |
| Steel Base Plate | 309170180 | 1 | QT450-10 | 8.34 |
| Spiral track spikes | 24*160 | 2 | Q235A | 0.58 |
| Spring washer | 24 | 2 | 60Si2Mn | 0.042 |
| Gauge block | 6# 、 8# 、 10# 、 12# | 1 | Nylon 66 | 34.95cm³ |
| Joint Gauge Block | 6# 、 8# 、 10# 、 12# | 1 | Nylon 66 | 38.02cm³ |
| Rubber Pad Plate I | 182*131*10 | 1 | Rubber | 198.42cm³ |
| Rubber Pad Plate II | 310*190*10 | 1 | Rubber | 301.15cm³ |
| Plastic Dowels | - | 2 | Nylon 66 | 78.2cm³ |
| Number | Name | Material | QTY |
|---|---|---|---|
| 1 | Rail Clip | Spring steel | 2 |
| 2 | Steel Base Plate Assembly Structure | / | 1 |
| 3 | Under-rail Pad | Rubber | 2 |
| 4 | Gauge Block | PA66+30%GF | 2 |
| 5 | Anchor Bolt | 8.8 | 2 |
| 6 | Spring Washer | Spring steel | 2 |
| 7 | Square Block | QT450-10 | 2 |
| 8 | Plastic Dowels | PA66+30%GF | 2 |
| 9 | Insulating Buffer Pad | HDPE | 1 |
| Number | Name | QTY | Material | Volume or mass |
|---|---|---|---|---|
| 1 | Under-rail elastic pad | 1 | TPE | 284cm³ |
| 2 | Insulated Gauge Block | 2 | Glass-fiber reinforced polyamide 66 | 95.9cm³ |
| 3 | Type III clip | 2 | 60Si2Mn | 1.65kg |
| 4 | Anchor bolt | 2 | 45# | 2.44kg |
| 5 | Flat Washer 30 | 2 | Q235-A | 0.10kg |
| 6 | Heavy-Duty Spring Washer 30 | 2 | 65Mn | 0.18kg |
| 7 | Adjustable Spacer Plate | 2 | QT450-10 | 0.74kg |
| 8 | Steel Base Plate | 1 | QT450-10 | 11.61kg |
| 9 | Elastic Base Plate Pad | 1 | TPE | 706cm³ |
| 10 | Plastic Dowels | 2 | Glass-fiber reinforced polyamide 66 | 294cm³ |
| 11 | Steel Base Plate Shim | 1 | Polyethylene | / |
| Name | Specifications | QTY | Material | Volume or mass |
|---|---|---|---|---|
| Nut | M24 | 2 | Q235A | 0.224kg |
| Flat washer | φ24 | 2 | Q235A | 0.138kg |
| T-bolt | T3 | 2 | Q235A | 0.90kg |
| Rail Clip | W5 | 2 | 60Si2MnA | 2.26kg |
| Gauge Baffle Plate | WJ-12 | 2 | QT450-10 | 4.78kg |
| Embedded Base Plate | WJ-12 | 2 | QT450-10 | 6.8kg |
| Insulated Gauge Block | WJ-12 | 2 | PA66-GF | 170cm³ |
| Under-rail Pad | WJ-12 | 1 | PE/EVA blend | 205cm³/6mm |
| Steel Base Plate | WJ-12 | 1 | Q235A | 5kg |
| Elastic Base Plate Pad | WJ-12 | 1 | TPEE | 450cm³ |
| Steel Base Plate Shim | WJ-12 | 1 | PE | 34cm³/5mm |
| Pre-set Base Plate Shim | WJ-12 | 1 | PE | 275cm³ |
Specifying a Rail Fastening System for a Track Project
Fastening in railway is the rail-to-sleeper or rail-to-slab connection that resists longitudinal, lateral and vertical movement, maintains gauge and transfers load into the track structure. It is a system of clips, pads, insulators, shoulders or dowels and fasteners, not a part on its own, so the components must be matched. Fastening of rails is that controlled clamping of the rail foot to the sleeper or slab; it is separate from rail joining, where fishplates connect rail ends. The assembly depends on rail section, sleeper or slab, standard and environment.
Rail fastening systems vary by track type: conventional systems for timber or concrete sleepers, elastic systems with spring clips and resilient pads, direct fixation systems for slab track, fast clip systems, and metro anti-vibration systems that add damping pads. Compare them on rail profile, sleeper or slab, required adjustability, insulation, corrosion protection and noise or vibration control. Yuerui lists conventional railway fastening systems, a complete metro anti-vibration fastening system for elastic isolation on concrete sleepers, the DJK5, DT I, DT II and DZIII metro systems, and WJ-8 components.
A fastening system in railway works as a chain: the clip provides clamping force, the pad provides elasticity and electrical insulation, the insulator isolates, and the shoulder or dowel anchors the assembly to the sleeper or slab. Installation runs from sleeper or slab preparation through pad placement, setting the rail, seating the clip and insulator, and tightening. Torque, gap and component fit should follow the project specification rather than a general figure.
- Fast clip rail fastening uses a clipped elastic rail clip anchored in a shoulder or baseplate to hold the rail foot, often with a pad and insulator. It differs from other elastic clips in how the clip is anchored and driven home, so check rail profile, shoulder type, pad, insulation, corrosion finish and the installation tools.
- Direct fixation rail fasteners attach the rail to a concrete track bed or slab, often with a baseplate, resilient pad and insulating components, and are considered where ballast depth, clearance, maintenance access or vibration control matters. Check the concrete interface, adjustability, drainage, stray current insulation, corrosion and the specified track standard.
- Elastic fastening in railway uses elastic rail clips and resilient pads to keep clamping force, absorb vibration, allow controlled movement and insulate the track circuit. A buyer may need elastic clips, rail pads, insulators, shoulders or dowels, nuts and washers. Yuerui lists elastic rail clips, E-type clips, Dacromet rail clips, bar-spring clips, rail pads, insulators, nuts and washers and quotes to the specified track standard.
Matching Rail Clips, Pads and Insulators Within One Assembly
Clips, pads and insulators are selected as a set because the clip clamping force acts through the pad and insulator onto the rail foot. Pad stiffness and thickness change vertical resilience, the insulator material sets electrical isolation, and the shoulder or dowel geometry decides which clip fits. A pad that is too stiff reduces vibration isolation, and insufficient insulation can bridge the track circuit. See rail pads and rail insulators for the component roles in the assembly.
Yuerui supplies railway insulators, rail clips, rail pads, nuts and washers, and lists a full series of E-type rail clips, subway rail clips, Dacromet rail clips, bar-spring clips and nylon gauge blocks. Projects can mix different rail fasteners and track accessories in one shipment to cut logistics cost and simplify procurement, and ODM service covers customization from samples or from buyer designs. Send the rail profile, sleeper or slab type, track standard and quantity for a quotation.
Request a quotation
Share the fastening system, rail profile, sleeper type and quantities.
Or write to sales@railwayfastenersupply.com