YueruiRequest a quotationQuote

Fish Plate Railway Guide: Types, Joint Bars and Selection

A fish plate in railway track is a joint plate that connects and secures abutting rail ends, transferring load and keeping alignment. This fish plate railway guide covers terminology, joint bar function, joint assembly, types and selection, and how to request a quotation.

Get a quotation for your track project

Rail fishplates

Fish Plate Railway Guide: Types, Joint Bars and Selection

A fish plate in railway track is a rail joint plate that connects and secures abutting rail ends, helps transfer load across the joint and maintains alignment. A railway fishplate must suit the rail profile and the joint bolt-hole pattern; standard, insulated or special plates are chosen according to the track standard and the service conditions on the line. Selection factors are the rail profile, fastening system, track standard, insulation needs and coating. Send the rail profile, standard and quantity through the inquiry form or sales email for a quotation.

On the rail, the fish plate is a steel plate fitted to the rail web at a joint, usually in pairs with joint bolts. The term is often written as fishplate. Fit depends on the rail section, hole spacing and whether the joint is insulated. Rail joint bar is another name for the plate, and it works with fish bolts to clamp the rail ends. Order details cover rail profile or model, hole pattern, standard, plain or insulated design, coating and quantity. Yuerui lists a 132RE fish plate as an AREMA standard joint bar component and also lists a 136RE fish plate.

A fishplate joint is two rail ends aligned and clamped by fishplates and joint bolts, with the plates bearing on the rail webs. Checks at installation cover rail end alignment, correct plate fit, bolt condition and tightening to the value the track standard specifies. Where the track circuit needs electrical separation, insulated fishplates and the matching insulated joint parts are used instead of plain plates.

  • Standard joint plates for plain rail joints, matched to the rail profile and bolt-hole pattern.
  • Insulated and cemented insulated fishplates for joints that must not carry track circuit current.
  • Anti-creep fishplates, hot-forged from high-tensile steel with an anti-slip tooth structure.
  • Bulged fishplates for broken welded rails or temporary repair of a cracked welded rail joint with an emergency clamp.
  • Special-shaped fishplates, with customization from drawings or samples and galvanized or Dacromet anti-corrosion available.
  • Rail-standard series, including Yuerui’s UIC fishplate range covering European rail types and AREMA fishplate range covering North American rail models.

Rail fishplate specifications

Bulged type rail fish plate railway joint connecting bar component fishplate
ParameterValue
TypeFishplate
Tensile StrengthCustomized
UsageFor train railway subway
TrademarkYuerui
HS Code7302400000
Holes6 Holes, 4-Holes
ProductP50 Fishplate
Transport PackagePallet
Special profile rail shaped fish plate custom railway joint bar component fishplate
ParameterValue
TypeFishplate
Tensile StrengthCustomized
UsageFor train railway subway
TrademarkYuerui
HS Code7302400000
Holes6 Holes, 4-Holes
ProductP50 Fishplate
Transport PackagePallet
Uic fishplate
TypeDiameter(mm)Weight(kg)Material
UIC54108.5mm*27mm*41mm23.92kg40#
P50820mm*104.2mm*46mm18.7kg55#
P60820mm*123.8mm*45mm23.3kg55#
Uic fishplate
ParameterValueValue B
National Standard Fishtail PlateNational Standard Fishtail Plate
T-RailStandardMaterial
43KGTB/T 2345-2008B7
50KGTB/T 2345-2008B7
60KGTB/T 2345-2008B7
BS Fishtail PlateBS Fishtail Plate
BS75RBS 47-1EUROPEAN GRADE 700
BS80ABS 47-1EUROPEAN GRADE 700
BS90ABS 47-1EUROPEAN GRADE 700
BS100ABS 47-1EUROPEAN GRADE 700
BS113ABS 47-1EUROPEAN GRADE 700
JISE Standard Rail FishplatesJISE Standard Rail Fishplates
37AJIS E 1102-2001SS490 S20C
50NJIS E 1102-2001SS490 S20C
CR73JIS E 1102-2001SS490 S20C
CR¹00JIS E 1102-2001SS490 S20C
BS113AJIS E 1102-2001SS490 S20C
AREMA 2007 Standard Rail FishplatesAREMA 2007 Standard Rail Fishplates
100lb.ASCEAREMA 2007AREMA GRADE/STEEL GRADE55#
115REAREMA 2007AREMA GRADE/STEEL GRADE55#
132REAREMA 2007AREMA GRADE/STEEL GRADE55#
136REAREMA 2007AREMA GRADE/STEEL GRADE55#
Crane Rail FishplatesCrane Rail Fishplates
104Ib.CRAREMA 2007AREMA GRADE/STEEL GRADE55#
1051b.CRAREMA 2007AREMA GRADE/STEEL GRADE55#
135Ib.CRAREMA 2007AREMA GRADE/STEEL GRADE55#
1711b.CRAREMA 2007AREMA GRADE/STEEL GRADE55#
175Ib.CRAREMA 2007AREMA GRADE/STEEL GRADE55#
Standard length: 914.4mm Drilled or punched holes, 4-hole or 6-hole configurationStandard length: 914.4mm Drilled or punched holes, 4-hole or 6-hole configuration
Uic fishplate
TypeUnit Weight Kg/mSize(mm)Size(mm)Size(mm)Size(mm)MaterialRailway ModelTrack unit weight Kg/mImplementation Standards
UIC Standard Rail Matching FishplatesUIC Standard Rail Matching FishplatesUIC Standard Rail Matching FishplatesUIC Standard Rail Matching FishplatesUIC Standard Rail Matching FishplatesUIC Standard Rail Matching FishplatesUIC Standard Rail Matching FishplatesApplicable TrackApplicable TrackApplicable Track
TypeUnit Weight Kg/mabcxMaterialRailway ModelTrack unit weight Kg/mImplementation Standards
TypeUnit Weight Kg/mabcyMaterialRailway ModelTrack unit weight Kg/mImplementation Standards
U7923.92108.5327412.75Grade700UIC5454.43UIC
U8529.68120.9224452.75Grade700UIC6060.34UIC
Fishplate Standards: UIC 864-4 Standard, UIC 864-8 StandardFishplate Standards: UIC 864-4 Standard, UIC 864-8 Standard

How Rail Section, Fastening System and Coating Affect Fishplate Choice

A fishplate is shaped to the rail section at the joint. The plate must match the rail height, web thickness and bolt-hole spacing, so a plate made for one rail section will not fit another. The joint bar profile follows the contact it makes with the rail web, and the bolt holes must line up with the holes in both rail ends before the joint is tightened.

The joint sits within the fastening system around it. On base-plate track, the joint sleeper, rail pads and insulators work with the plates and fish bolts to hold the joint in line. The fastening used on the adjacent sleepers also matters, because the joint should not change the stiffness of the track from one sleeper to the next.

Coating follows the service environment. Yuerui’s UIC fishplate range covers European rail types with customizable hot-dip galvanized and zinc diffusion treatment, and the AREMA fishplate range covers North American rail models with customizable hot-dip galvanized treatment. Yuerui offers full custom service for special-shaped rail joint plates, including customization from drawings or samples, with galvanized or Dacromet anti-corrosion available.

Ordering Fishplates from Yuerui: Standards, Documents and Delivery

Yuerui supplies railway track fasteners and track components through qualified supply chain partners, made to the track standard a project specifies, including Chinese, European, Russian GOST, Ukrainian DSTU and AREMA standards. The fishplate range includes main models 115RE, 132RE, UIC60, UIC54, BS80A, BS90A, BS100A, and 90/91LB. Joint plates rated at 43, 50, 60, and 75 kg/m are widely used for connecting and securing conventional railway tracks.

A normal enquiry starts with the rail profile or model, the track standard, drawings where available and the quantity. Yuerui confirms a pre-production sample and carries out a 100% final inspection before shipment. Documents include MTC/COC, dimensional inspection reports, mechanical test reports and coating thickness reports, and Yuerui can support third-party testing for railway project tender requirements if needed.

Typical lead time is about one month in both peak and off season, depending on product and order quantity. Payment is by L/C, T/T, D/P, PayPal or Western Union, in USD or CNY, and quotes are on EXW, FOB, CIF or DAP terms. Orders ship from Shanghai Port or Ningbo Port. Yuerui offers ODM service and customization from samples or buyer designs, and several listings, such as the bulged fishplate, accept orders from 1 piece.

Request a quotation

Share the fastening system, rail profile, sleeper type and quantities.

Or write to sales@railwayfastenersupply.com

* Required