SKL Clip for Railway Track Fastening Systems
Yuerui supplies SKL clips and railway track fasteners from Shanghai, matching each order to the track standard a project specifies and working through qualified supply chain partners.
Request a quote for this model
- SKL 1
- Ø13
- SKL 3
- Ø13
- SKL 12
- Ø13

SKL Clip Selection for Railway Fastening Systems
An SKL clip is an elastic rail tension clamp used in railway fastening systems, commonly with concrete sleepers. It presses the rail foot against the sleeper or base plate seat and flexes under load to hold the rail. Selection depends on the rail profile, the sleeper or seat design, the specified fastening system and the required track standard. A clip that suits a given rail section and shoulder arrangement may not fit another, so the interface dimensions and system designation should be checked before ordering.
Yuerui supplies SKL clips made to the track standard a project specifies, including Chinese, European, Russian GOST, Ukrainian DSTU and American AREMA standards. Yuerui supplies railway track fasteners and track components, including rail clips, rail pads, railway insulators, nuts and washers, through qualified supply chain partners. The table below lists type, diameter, weight and material for the SKL clip range. Clip selection should be read together with the rail fastening system because the shoulder, pad and insulator affect fit.
For a quotation, send the rail profile, sleeper type, fastening system, track standard, quantity and delivery destination. Yuerui confirms a pre-production sample and carries out a 100% final inspection before shipment. Yuerui can provide MTC/COC documents, dimensional inspection reports, mechanical test reports and coating thickness reports, and can support third-party testing for railway project tender requirements if needed.

Rail clips: two gray steel tension clamps 
Rail clips: two dark coated tension clamps
SKL clip specifications
| Type | Diameter(mm) | Weight(kg) | Material |
|---|---|---|---|
| SKL 1 | Ø13 | 0.48kg | 60Si2Mn |
| SKL 3 | Ø13 | 0.48kg | 60Si2CrA |
| SKL 12 | Ø13 | 0.53kg | 38Si7 |
| SKL 14 | Ø13 | 0.53kg | 60Si2MnA |
How SKL Clips Seat on Sleepers and Work with Pads and Insulators
During installation, the SKL clip is seated in its shoulder or base plate seat and its bar presses on the rail foot. The pad beneath the rail distributes pressure and adjusts stiffness, while the insulator separates the clip or rail from the seat where electrical isolation is required. Correct seating depends on the shoulder cast into the sleeper or the base plate pocket, so the clip, pad and insulator should be selected as a compatible set.
Rail profile changes the contact point on the rail foot, and sleeper or seat design changes the clip’s installed deflection. For that reason, an SKL clip order should identify the fastening system rather than only the clip name. Related components such as rail pads and rail insulators should be stated when the assembly is supplied together, so the interfaces remain consistent.
Supply, Documentation and Shipping for SKL Clip Orders
Yuerui is based in Shanghai, China, and supplies through qualified supply chain partners. Orders can be quoted on EXW, FOB, CIF or DAP terms, with payment by L/C, T/T, D/P, PayPal or Western Union in USD or CNY. Yuerui ships from Shanghai Port or Ningbo Port. Typical lead time is about 1 month in both peak and off season, depending on product and order quantity.
Yuerui lists the United States, Russia, Australia, Mexico, Kazakhstan and Uganda among its global markets, and its main markets include North America, South America, Eastern and Western Europe, Southeast and Eastern Asia, Africa, Oceania and the Middle East. Yuerui offers ODM service, with customization from samples or from the buyer’s designs. Drawings or samples with rail profile, fastening system and standard details can be sent through the contact page when the order needs a specific interface.
How an order works
- Send your details
- Part type, rail profile, track standard or drawing, quantity and destination port.
- Quotation and sample
- Yuerui quotes on EXW, FOB, CIF or DAP terms and confirms a pre-production sample before the order runs.
- Payment
- Payment by L/C, T/T, D/P, PayPal or Western Union, in USD or CNY.
- Inspection
- A 100% final inspection is carried out before shipment.
- Lead time and shipping
- Lead time is usually about one month, depending on product and quantity; orders ship from Shanghai Port or Ningbo Port.
Request a quotation
Tell us the model, the rail it is used with and the quantity you need.
Or write to sales@railwayfastenersupply.com